Korean Innovation
Core Technology
Ultrafiltration is a pressure-driven membrane separation process that uses semi-permeable membranes with pore sizes between 0.1 and 0.001 microns — small enough to physically block bacteria, viruses, and other microorganisms while allowing clean water molecules to pass through.
Unlike reverse osmosis, UF operates at low pressure without chemicals, wastes no water, and requires no electricity — making it the ideal technology for Sri Lanka's varied conditions.
Our membranes are manufactured by Synopex Co. Ltd in South Korea, certified under ISO 9001 and ISO 14001, and further enhanced with nano-technology contributed by Sunbola Technology.
Water Science
Acidity & Alkalinity Scale
pH measures how acidic or basic water is on a scale of 0 to 14. Neutral water is 7. The ideal pH range for drinking water is 6 to 8.5.
pH below 6.5 indicates acidic, corrosive water containing toxic metals. pH above 8.5 indicates hard water that causes scaling and health issues.
Mineral & Chemical Content
TDS measures dissolved minerals, chemicals, and fertilizers in water. High TDS causes bad taste, pipe scaling, and health risks.
Compliance
Physical Parameters
Chemical Parameters
Toxic & Bacteriological
Sri Lanka's Water Crisis
Chronic Kidney Disease of Unknown Etiology (CKDU) has been strongly linked to contaminated drinking water in Sri Lanka's agricultural regions — making effective water purification not a luxury, but a public health necessity.
Filtration Science
Uses a thick, porous medium with wide, irregular channels. Particles are trapped throughout the entire depth of the filter matrix, not just on the surface. Ideal for high turbidity water with large particle loads.
Wide pore size · High volume · Pre-treatment stage
Operates through a very precisely sized membrane layer. Contaminants larger than the pore size are blocked entirely at the membrane surface. This enables high-precision removal of bacteria, viruses, and fine particles.
Narrow pore size · High precision · Absolute barrier